Gimbal : GM-12

Newmark’s high precision 12" gimbal system is designed for general purpose pointing, scanning and tracking applications for large optics, antennae and other sensors.

gimbal mount

Our large gimbal system is equipped with High Performance rotary stages and offer excellent stiffness and load capacity making them suitable for a wide variety of applications. Depending on the positioning requirements, the gimbal can be equipped with shaft mounted rotary encoders or direct-read high accuracy optical encoders. And since we can also supply the control electronics, we can guarantee your system's positioning performance.

gimbal mount


Motor Options

Standard NEMA 23 Stepper Motor
  • NEMA 23 high torque brushless motor
  • 2.0 Amp/Phase
  • Low inductance
  • 1.8 degrees/step
  • Compatible with the following motion controllers:
    NSC-M Series | NSC-G Series
Brushless DC Servo Motor
  • NEMA 23 brushless DC servo motor.
  • Speeds up to 60°/sec
  • 4000 Count/rev optical rotary encoder with index mark
  • Continuous Motor Torque: 0.636 Nm (5.63 lb-in)
  • Peak Motor Torque: 1.913 Nm (16.93 lb-in)
  • Maximum Voltage: 170 Vdc
  • Compatible with the following motion controller:
    NSC-G Series

 


Call 949-830-0621 for ordering information.

Related Products:


GM-12 with Mirror Cell
Mirror Cell

GM-12 with Payload Mounting Plate
Mounting Plate

GM-12 without Payload Mounting Plate
GM-12 : No mounting plates





Repeatability: 5 arc seconds
Accuracy: 70 arc seconds
Resolution: 0.36 arc-sec
Elevation range: 360° continuous
Azimuth Range: ±90°
Load capacity: 50 lbs.
Drive motors: size 23 stepper motor
 

newmark systems
Rotary PositionersLinear PositionersGimbal MountsMotion ControllersCustom Products