Facebook Twitter YouTube

eBelt - Belt Driven Long Travel Linear Slide

eBelt XY table Long Travel Linear Slide eBelt XY table Long Travel Linear Slide eBelt XY table Long Travel Linear Slide eBelt Linear Stage
eBelt linear stages eBelt XY Gantry Long Travel Linear Slide

The eBelt Long Travel Linear Slides are designed for less demanding applications in research & development, automation, and other industrial areas requiring quick positioning of light payloads.

The eBelt Long Travel Linear Slide is available in XY gantry configurations.

The eBelt Long Travel Linear Slides are designed for a variety of applications in research & development, automation, and other industrial areas requiring quick positioning of light payloads.

The eBelt Linear Slide is offered in travel lengths from 700mm to 1500mm. The eBelt comes standard with a high torque size 23 stepper motor or optionally, a MDrive intelligent stepper motor. Both motor options are also available with rotary encoders. End of travel limit switches come standard on the eBelt linear stage.

The drive system utilizes a 10mm wide timing belt to move the carriage. The carriage uses four recirculating ball bushings which rides on two ground case hardened shafts supported at the ends of the stage.

All eBelt linear slides are machined from 6061 aluminum alloy and black anodized.





Specifications

Travel Range
700 mm, 800 mm, 1000 mm, 1200 mm, 1500 mm
Resolution
1.3 µm (calculated)
Repeatability
250 µm
Accuracy
0.25 µm/mm of travel
Max. Speed
200 mm/sec
Maximum Load
6.8 kg (15 lb.)
Stage Weight
EB-700: 7.5 kg (16.5 lb.) | EB-1000: 8.5 kg (18.8 lb.) | EB-1500: 11.9 kg (26.3 lb.)
Material
Aluminum Alloy Construction
Finish
Black Anodize
 

Travel Range
700mm 800mm 1000mm 1200mm
1500mm
Torsional Stiffness (Degree/N-m)
0.645 0.323 0.184 0.0922
0.0645

Single Stage Deflection Calculation:

P = Mass (Kg); L = Length of Travel (mm ); y = Deflection (mm)

y = .218x10-9*P*L3


Dimensions

eBelt with Stepper Motor
eBelt with Stepper MotorClick to Enlarge


eBelt with MDrive Motor
eBelt with MDrive MotorClick to Enlarge


eBelt 700mm XY Gantry Assembly
eBelt 700mm XY Gantry AssemblyClick to Enlarge


eBelt 800mm XY Gantry Assembly
eBelt 800mm XY Gantry AssemblyClick to Enlarge


eBelt 1000-1500mm XY Gantry Assembly
eBelt 1000-1500mm XY Gantry AssemblyClick to Enlarge


Motor Options

Size 23 MDrive Intelligent Stepper Motor The MDrive motor is a NEMA size 23 high torque 1.8° stepper motor integrated with an advanced, high resolution microstepping driver and a full featured programmable motion controller. With the MDrive motor there is no need for an external motion controller.
  • Integrated microstepping driver, motion controller and high torque motor
  • Two +5 to +24 VDC I/O lines
  • One 10 bit analog input selectable: 0 to +10 VDC, 0 to +5 VDC
  • RS-422/485 Communications
  • Input Voltage: +24 VDC
Download MDrive Software and User Manual
Size 23 Stepper Motor
  • NEMA 23 high torque stepper motor
  • 2.8 Amp/Phase
  • 0.9 Ohm/Phase
  • 2.5 mH/Phase
  • 1.8 degrees/step
  • Compatible with the following motion controllers:
    NSC-A1 Series | NSC-G Series

Order information

eBelt Part Number Configuration
Select a travel length and motor type
Travel
Motor Type



To order call 949-830-0621
 Part Number
 Description
 EB-700-1
eBelt - Belt Driven Long Travel Linear Slide
Travel: 700 mm
NEMA 23 Stepper Motor



Downloads


 
CAD Download eBelt CAD Files - STEP File Format



Wiring Documentation
PDF eBelt Wiring, Stepper Motor »
PDF eBelt Wiring, MDrive Motor »