Motorized Rotary Stage : RM-5

The RM-5 Series rotary stage is machined from 6061 aluminum alloy to provide a light yet stiff and stable platform.

motorized rotary stage


The design takes advantage of a single preloaded crossed roller bearing for the table movement. This design approach eliminates the use of a dual bearing configuration thus improving on axial runout and wobble. This rotary stage is offered with a standard gear ratio of 72:1. A proprietary gear preload system insures zero backlash in the gear train for the life of the product.

Specifications


Call 949-830-0621 for ordering information.

Related Products:

Motor Options
Standard NEMA 23 Stepper Motor
  • NEMA 23 high torque brushless motor
  • 2.0 Amp/Phase
  • Six lead motor connection
  • Low inductance
  • 1.8 degrees/step
  • Compatible with the following motion controllers:
    NSC-1 Series | NSC-M Series | NSC-G Series
MDrive Intelligent Stepper Motor
  • Highly integrated microstepping driver, motion controller and NEMA 23 high torque brushless motor
  • Four +5 to +24 VDC I/O lines
  • One 10 bit analog input selectable: 0 to +10 VDC, 0 to +5 VDC
  • RS-422/485 Communications
  • Input Voltage: +24 VDC

  Brushless DC Servo Motor
  • NEMA 23 brushless DC servo motor.
  • 4000 Count/rev optical rotary encoder with index mark
  • Continuous Motor Torque: 0.636 Nm (5.63 lb-in)
  • Peak Motor Torque: 1.913 Nm (16.93 lb-in)
  • Maximum Voltage: 170 Vdc
  • Compatible with the following motion controllers:
    NSC-3311 Series | NSC-M Series | NSC-G Series

View Dimensions
RM-5 Dimensions

Repeatability: 5 arc seconds
Accuracy: 72 arc seconds
Resolution: 0.36 arc-sec
Travel: 360° continuous
Gear Ratio: 72:1
Load capacity: 275 lbs.
Moment: 40 ft-lb
Max. Speed: 20°/sec
Drive motor: Nema 23










 

newmark systems
Rotary PositionersLinear PositionersGimbal MountsMotion ControllersCustom Products
Call us at 949-830-0621 or 866-999-8225