Motorized Rotary Stage : RM-8

This high capacity rotary stage features a 8 inch diameter stainless steel table top designed to support a 700 lb load.

motorized rotary stage
Repeatability: 5 arc seconds
Accuracy: 72 arc seconds
Gear Ratio: 80:1
Travel: 360° continuous
Load capacity: 700 lbs.
Drive motor: Stepper or Servo



Since the bearings and internal gears are totally sealed, this rotary stage is well suited to work in severe wet environments such as in machine tool applications where coolant is present. It can be fitted with a high performance servo motor or with a stepper motor. The table can also be supplied with an optional pneumatic brake for added stability when stopped.


Call 949-830-0621 for ordering information.

Related Products:

Motor Options
Standard NEMA 23 Stepper Motor
  • NEMA 23 high torque brushless motor
  • 2.0 Amp/Phase
  • Six lead motor connection
  • Low inductance
  • 1.8 degrees/step
  • Compatible with the following motion controllers:
    NSC-1 Series | NSC-M Series | NSC-G Series
MDrive Intelligent Stepper Motor
  • Highly integrated microstepping driver, motion controller and NEMA 23 high torque brushless motor
  • Four +5 to +24 VDC I/O lines
  • One 10 bit analog input selectable: 0 to +10 VDC, 0 to +5 VDC
  • RS-422/485 Communications
  • Input Voltage: +24 VDC

  Brushless DC Servo Motor
  • NEMA 23 brushless DC servo motor.
  • IP65 Construction
  • 4000 Count/rev optical rotary encoder with index mark
  • Continuous Motor Torque: 0.847 Nm (7.5 lb-in)
  • Peak Motor Torque: 2.559 Nm (22.65 lb-in)
  • Maximum Voltage: 325 Vdc
  • Compatible with the following motion controllers:
    NSC-3311 Series | NSC-M Series | NSC-G Series
RM-8
 

newmark systems
Rotary PositionersLinear PositionersGimbal MountsMotion ControllersCustom Products
Call us at 949-830-0621 or 866-999-8225