newmark-systems-logo

D-Slide Long Travel Linear Slide

The D-Slide is available in XY and XYZ configurations with optional adapter plate.

The D-Slide is offered in travel lengths of 400 mm, 600 mm, 800 mm, and 1000 mm. The D-Slide comes standard with a high torque size 23 stepper motor. Motor options include an MDrive intelligent stepper motor and a brushless servo motor with 1000 line encoder. The stepper motor options are available with rotary encoders. End of travel limit switches come standard on the D-Slide linear stage.

D-Slide Linear Slide

Vacuum compatible versions of the D-Slide are available.

The base of the D-Slide is made from a light yet stiff aluminum extrusion, on top of which are mounted two 15 mm linear guide bearings. These bearings offer high load capacities and smooth motion over the entire travel range. The drive system utilizes a stainless steel lead screw with a self-adjusting anti-backlash drive nut to move the carriage.

The extruded base of the D-Slide has t-slots on the sides and bottom for almost endless mounting options.

Every D-Slide has its connectors integrated into the side of the motor mount for a clean and reliable connection.

Ordering

D-Slide

Typical lead-time: 6 Weeks or Sooner
Typical lead-time: MDrive Motor Option – Limited Availability
SKU: DS- Category:

$3,245.00

RS-485/422 to USB Adapter with ribbon cable for MDrive Motor

RS-485/422 to USB adapter with ribbon cable for MDrive motor.
In Stock

SKU: 250138 Category: Tag:

$125.00

Power Supply, 24V, 2.5A

Universal AC/DC Power Supply
Input: 100-240 VAC 50/60 Hz
Output: 24V, 2.5A
Plug: 2.1 x 5.5 mm
In Stock

SKU: 900055 Category: Tag:

$52.00

Specifications
Travel Range
400 mm, 600 mm, 800 mm, 1000 mm
Resolution
0.4 µm (@ 125 microsteps), 2.5 µm (servo motor)
Encoder
Optical rotary encoder mounted to read of motor, 4000 CPR with index
Lead Screw Pitch
10 mm
Accuracy
0.0006 mm/mm of travel
Max. Speed
100 mm/sec (stepper motor), 100 mm/sec (servo motor), 100 mm/sec (MDrive motor)
Maximum Load
68 kg (150 lb.)
Stage Weight
DS-400: 6 kg (13 lb.) | DS-600: 7 kg (15.5 lb.) | DS-800: 8.5 kg (18 lb.) | DS-1000: 9.5 kg (21 lb.)
Material
Aluminum Alloy Construction
Finish
Black Anodize
Operating Temperature
0°C to 50°C
Note: The carriage will back-drive with an axial load greater than 4.5 kg (10 lb) when power is off.
Dimensions
D-Slide with Stepper Motor D-Slide with Stepper MotorClick to Enlarge
D-Slide with MDrive Motor D-Slide with MDrive MotorClick to Enlarge
D-Slide with Servo Motor D-Slide with Servo MotorClick to Enlarge
D-Slide XY Mounting D-Slide XY MountingClick to Enlarge
D-Slide Z Mounting D-Slide Z MountingClick to Enlarge
Motor Options
size-23-stepper-motor
Size 23 Stepper Motor
  • NEMA 23 high torque stepper motor
  • 2.8 Amp/Phase
  • 0.9 Ohm/Phase
  • 2.5 mH/Phase
  • 1.8 degrees/step
  • Compatible with the following motion controllers: NSC-A1 Series | NSC-G Series
size-23-mdrive-stepper-motor
Size 23 MDrive Intelligent Stepper Motor
The MDrive motor is a NEMA size 23 high torque 1.8° stepper motor integrated with an advanced, high resolution microstepping driver and a full featured programmable motion controller. With the MDrive motor there is no need for an external motion controller.
  • Integrated microstepping driver, motion controller and high torque motor
  • Two +5 to +24 VDC I/O lines
  • One 10 bit analog input selectable: 0 to +10 VDC, 0 to +5 VDC
  • RS-422/485 Communications
  • Input Voltage: +24 VDC
Download MDrive Software and User Manual
Scroll to Top
Contact Newmark Systems