This linear stage line is offered in travel lengths from 400mm to 600mm. The ETL comes standard with a high torque size 23 or optionally, a MDrive intelligent stepper motor. Both motor options are also available with rotary encoders. End of travel limit switches come standard on the ETL stages.
The drive system utilizes a stainless steel rolled lead screw to move the carriage. The carriage uses four recirculating ball bushings which rides on two ground case hardened shafts supported at the ends of the stage.
All ETL products are machined from 6061 aluminum alloy and black anodized.
An IP65 version of the ETL Series is available for wet environments.
Travel Range | 400 mm, 500 mm, 600 mm |
Resolution | 0.4 µm |
Lead Screw Pitch | 10 mm |
Accuracy | 0.0006 mm/mm |
Max. Speed | 100 mm/sec |
Maximum Load | 4.5 kg (10 lb.) |
Stage Weight | ETL-400: 2.5 kg (5.4 lb.) | ETL-500: 3 kg (6.7 lb.) | EB-600: 4.5 kg (10 lb.) |
Material | Aluminum Alloy Construction |
Finish | Black Anodize |
The MDrive motor is a NEMA size 23 high torque 1.8° stepper motor integrated with an advanced, high resolution microstepping driver and a full featured programmable motion controller. With the MDrive motor there is no need for an external motion controller.
CAD Files – STEP File Format
400mm Travel
ETL 400mm Travel, Standard Stepper
ETL 400mm Travel, Stepper with Encoder
ETL 400mm Travel, MDrive Motor
500mm Travel
ETL 500mm Travel, Standard Stepper
ETL 500mm Travel, Stepper with Encoder
ETL 500mm Travel, MDrive Motor
600mm Travel
ETL 600mm Travel, Standard Stepper
ETL 600mm Travel, Stepper with Encoder
ETL 600mm Travel, MDrive Motor