The low-cost eTrack linear stages are designed for a variety of applications in research & development, automation, and other industrial areas requiring quick positioning of light payloads.
The eTrack offers travel lengths from 50mm to 300mm and two leadscrew pitches: 2mm & 12mm. The eTrack comes standard with a high torque size 17 stepper motor end of travel limit switches. The limit switch and motor cables are terminated by a 9 pin connector near the rear of the stage next to the motor.
The drive system utilizes a stainless steel ACME leadscrew with internally lubricated plastic drive nut. The drive nut offers zero backlash operation that automatically adjusts for wear to insure zero backlash for the life of the stage.
The eTrack is available as an XY linear stage.
Please note: The eTrack is not available in travel lengths greater than 150mm for XY and XYZ configuration.
All eTrack linear stages are machined from 6061 aluminum alloy and black anodized.
ET-Z Vertical Mounting BracketeTrack Vertical Mounting Bracket
SKU: ET-Z
Category: Uncategorized
$85.00 |
RS-485/422 to USB Adapter with ribbon cable for MDrive MotorRS-485/422 to USB adapter with ribbon cable for MDrive motor. $125.00 |
Power Supply, 24V, 2.5AUniversal AC/DC Power Supply $52.00 |
Travel Range |
50 mm, 100 mm, 150 mm, 200 mm, 250 mm, 300 mm |
Resolution |
0.04 µm (2 mm pitch leadscrew)
0.24 µm (12 mm pitch leadscrew) |
Accuracy |
0.0006 mm/mm of travel |
Repeatability |
30 µm |
Encoder |
Optical rotary encoder mounted to rear of motor, 4000 CPR with Index (Optional) |
Max. Speed |
20 mm/sec (2 mm pitch leadscrew)
150 mm/sec (12 mm pitch leadscrew) |
Maximum Load |
4.5 kg (10 lb.) |
Stage Weight |
ET-50: 1.1 kg (2.5 lb.) | ET-300: 1.6 kg (3.5 lb.) |
Material |
Aluminum Alloy Construction |
Finish |
Black Anodize |

Size 17 Stepper Motor
- NEMA 17 high torque brushless motor
- 1.33 Amp/Phase
- 2.5 Ohm/Phase
- 42 oz-in holding torque
- 1.8 degrees/step
- Compatible with the following motion controllers: NSC-A1 Series | NSC-A2L Series | NSC-G Series

Size 17 MDrive Intelligent Stepper Motor
The MDrive motor is a NEMA size 17 high torque 1.8° stepper motor integrated with an advanced, high resolution microstepping driver and a full featured programmable motion controller. With the MDrive motor there is no need for an external motion controller.- Integrated microstepping driver, motion controller and high torque motor
- Two +5 to +24 VDC I/O lines
- One 10 bit analog input selectable: 0 to +10 VDC, 0 to +5 VDC
- RS-422/485 Communications
- Input Voltage: +24 VDC
CAD Files – STEP File Format
ET-50-x1, Stepper Motor, 50mm Travel
ET-50-x1, Stepper Motor, 50mm Travel
ET-50-x2, Stepper Motor with Encoder, 50mm Travel
ET-50-x3, MDrive Motor, 50mm Travel
ET-100-x1, Stepper Motor, 100mm Travel
ET-100-x2, Stepper Motor with Encoder, 100mm Travel
ET-100-x3, MDrive Motor, 100mm Travel
ET-150-x1, Stepper Motor, 150mm Travel
ET-150-x2, Stepper Motor with Encoder, 150mm Travel
ET-150-x3, MDrive Motor, 150mm Travel
ET-200-x1, Stepper Motor, 200mm Travel
ET-200-x2, Stepper Motor with Encoder, 200mm Travel
ET-200-x3, MDrive Motor, 200mm Travel
ET-250-x1, Stepper Motor, 250mm Travel
ET-250-x2, Stepper Motor with Encoder, 250mm Travel
ET-250-x3, MDrive Motor, 250mm Travel
ET-300-x1, Stepper Motor, 300mm Travel
ET-300-x2, Stepper Motor with Encoder, 300mm Travel
ET-300-x3, MDrive Motor, 300mm Travel
eTrack Z Mounting CAD Files – STEP File Format
(Only Available For Travel Lengths Up To 150mm)