The LC Series linear stages are designed for a variety of applications in research & development, automation, and other industrial areas requiring quick positioning of light payloads.

The LC series offers travel lengths from 200 mm to 400 mm. Two lead screw pitches are available, a 2mm pitch for higher resolution and a 12mm pitch for high speed applications. The LC comes standard with a high torque size 17 stepper motor end of travel limit switches. The limit switch and motor cables are terminated by a 9 pin connector near the rear of the stage next to the motor.

The drive system utilizes a stainless steel ACME leadscrew with internally lubricated plastic drive nut. The drive nut offers zero backlash operation that automatically adjusts for wear to insure zero backlash for the life of the stage.

The LC Series can be configured as XY, XZ, or XYZ linear stage.

All LC linear stages are machined from 6061 aluminum alloy and black anodized.

Ordering

LC Series Linear Stage

Typical lead-time:  5 Weeks
Mdrive motor not available until January 2024
SKU: N/A Category:

$1,255.00

LC Series Vertical Gusset Assembly
LC Series Vertical Gusset Assembly
Specifications
Travel Range
200 mm, 300 mm, 400 mm
Resolution
0.04 µm (2 mm pitch lead screw) 0.24 µm (12 mm pitch lead screw)
Accuracy
0.0006 mm/mm of travel
Uni-directional Repeatability
±2 µm
Bi-directional Repeatability
15 µm
Encoder
Optical rotary encoder mounted to rear of motor, 4000 CPR with Index (Optional)
Max. Speed
12 mm/sec (2 mm pitch lead screw) 70 mm/sec (12 mm pitch lead screw)
Maximum Load
22.6 kg (50 lb.)
Limit Switch Type
Mechanical, normally closed
Stage Weight
LC-200: 2.8 kg (6.2 lb.) | LC-300: 3.3 kg (7.3 lb.) | LC-400: 3.8 kg (8.4 lb.) 
Material
Aluminum Alloy Construction
Finish
Black Anodize
Operating Temperature
0°C to 50°C
Dimensions

LC-200 Linear Stage LC-200 Linear StageClick to Enlarge

LC-300 Linear Stage LC-300 Linear StageClick to Enlarge

LC-400 Linear Stage LC-400 Linear StageClick to Enlarge

Motor Options
msl_stepper-motor
Size 17 Stepper Motor
  • NEMA 17 high torque brushless motor
  • 1.33 Amp/Phase
  • 2.5 Ohm/Phase
  • 42 oz-in holding torque
  • 1.8 degrees/step
  • Compatible with the following motion controllers: NSC-A1 Series | NSC-A2L Series | NSC-G Series
msl_mdrive-intelligent-stepper-motor
Size 17 MDrive Intelligent Stepper Motor
The MDrive motor is a NEMA size 17 high torque 1.8° stepper motor integrated with an advanced, high resolution microstepping driver and a full featured programmable motion controller. With the MDrive motor there is no need for an external motion controller.
  • Integrated microstepping driver, motion controller and high torque motor
  • Two +5 to +24 VDC I/O lines
  • One 10 bit analog input selectable: 0 to +10 VDC, 0 to +5 VDC
  • RS-422/485 Communications
  • Input Voltage: +24 VDC
Download MDrive Software and User Manual
Scroll to Top
Contact Newmark Systems