The HR-3 high speed rotary table is the ideal product for spinning light weight components at fast speeds. Possible applications include accelerometer and gyro calibration.
This low-cost HR-3 product line is designed for a variety of applications in research & development, automation, and other industrial areas requiring fast rotation of light payloads.
The HR-3 uses a high torque direct drive stepper motor. This design eliminates the use of worm gears which gives the HR-3 fast speeds, high reliability, and maintenance free operation.
The HR-3 is machined from 6061 aluminum alloy and black anodized.
Specifications
| Travel Range | 360° continuous |
| Resolution | 0.014° |
| Holding Torque | 0.71 Nm (100 oz-in) |
| Max. Acceleration (no load) | 12,000°/sec^2 |
| Speed Range | 120 – 6000°/sec (20 – 1000 RPM) |
| Maximum Load | 2.3 kg (5 lb.) |
| Stage Weight | 1.38 kg (3.04 lb.) |
| Material | Aluminum Alloy Construction |
| Finish | Black Anodize |
Motor Options
Size 23 Stepper Motor
- NEMA 23 high torque stepper motor
- 2.8 Amp/Phase
- 0.9 Ohm/Phase
- 2.5 mH/Phase
- 1.8 degrees/step
- Compatible with the following motion controllers:
NSC-A1 Series | NSC-G Series