DB Series – XY Gantry Linear Slide




The DB Series XY Gantry stage is offered in travel lengths from 400mm to 1000mm. This XY gantry comes standard with a high torque NEMA 23 stepper motors and a cable management system for the lower stage. Cable management is available on the upper stage for payloads that have cables running to them. End of travel limit switches come standard on the DBSeries linear stage.
The drive system on each axis utilizes a 10mm wide, steel reinforced timing belt to move the carriage. The carriage rides on 15mm linear guide bearings bolted to a stiff aluminum extruded chassis.
All DB Series linear slides are machined from 6061 aluminum alloy and black anodized.
DB Series XY Gantry Stage
Typical lead-time: 7 Weeks or Sooner
$6,740.00
NSC-G2-X2 Motion Controller
Typical lead-time: 8-10 Weeks
$3,307.00
Travel Range |
400 mm, 600 mm, 800 mm, 1000 mm |
Resolution |
4 µm @ 125 microsteps |
Encoder |
Optical rotary encoder mounted to read of motor, 4000 CPR with index (Optional) |
Linear Travel Per Motor Revolution |
100.53096 mm/rev |
Uni-directional Repeatability |
10 µm |
Bi-directional Repeatability |
75 µm |
Accuracy |
±200 µm |
Max. Speed |
800 mm/sec |
Maximum Payload |
11 kg (25 lb.) |
Stage Weight |
DB-400: 5 kg (11 lb.) | DB-600: 5.9 kg (13 lb.) | DB-800: 6.8 kg (15 lb.) | DB-1000: 7.5 kg (16.5 lb.) Individual stage weights, add together for total system weight. |
Limit Switches |
Inductive switches at each end of travel |
Material and Finish |
Aluminum Alloy, Black Anodize |
Operating Temperature |
0°C to 50°C |

Size 23 Stepper Motor
- NEMA 23 high torque stepper motor
- 2.8 Amp/Phase
- 0.9 Ohm/Phase
- 2.5 mH/Phase
- 1.8 degrees/step
- Compatible with the following motion controllers: NSC-A1 Series | NSC-G Series
CAD Files – STEP File Format
DB 400mm x 400mm Travel
DB 600mm x 600mm Travel
DB 800mm x 800mm Travel
DB 1000mm x 1000mm Travel