Call 866-999-8225

ETL Series XY Gantry

The ETL XY Gantry series is designed for less demanding applications in research & development, automation, and other industrial areas requiring quick positioning of light payloads.

This XY gantry line is offered in travel lengths of 400mm, 500mm and 600mm. The ETL XY Gantry comes standard with a high torque size 23 stepper motors. The stepper motor version is available with rotary encoders. End of travel limit switches come standard on the ETL stages.

The drive system utilizes a stainless steel rolled lead screw to move the carriage. The carriage uses four recirculating ball bushings which rides on two ground case hardened shafts supported at the ends of the stage.

All ETL products are machined from 6061 aluminum alloy and black anodized.


Part Number Configuration
Select a travel length, leadscrew pitch, and motor option.

Lead-time 2-3 weeks STND / IP65 Rated 6 weeks

Part Number: N/A


Travel Range 400 mm, 500 mm, 600 mm
Resolution 0.4 µm (@125 microsteps)
Lead Screw Pitch 10 mm
Accuracy 0.0006 mm/mm
Max. Speed 100 mm/sec
Maximum Load 4.5 kg (10 lb.)
Stage Weight ETL-400-400: 8.9 kg (19.5 lb.) | ETL-500-500: 9.5 kg (21 lb.) | ETL-600-600: 10.5 kg (23 lb.)
Material Aluminum Alloy Construction
Finish Black Anodize


ETL XY Gantry
ETL XY GantryClick to Enlarge

Motor Options

Size 23 Stepper Motor

  • NEMA 23 high torque stepper motor
  • 2.8 Amp/Phase
  • 0.9 Ohm/Phase
  • 2.5 mH/Phase
  • 1.8 degrees/step
  • Compatible with the following motion controllers:
    NSC-G Series